So I have decided that I am going to move toward getting my next piece of paper (certification) and take a back seat to applying for positions. Maybe something will come out of the ones that I have already applied for but as this is all items that I know and I just need to focus on how Cisco wants the answered so that I can ensure my future employers can confirm I know CCNA subject matter, time to focus on CCNA.
Lab 19 – IGP Interior Gateway Protocol Fundamentals Configuration
- Configure RIP on all routers
- (config)#route rip
- (config-router)#no auto
- (config-router)#network 10.0.0.0
- Verify routes
- (config-router)#do show ip route
- Add Internet route to RIP on router R4 and make interface f1/1 passive to make sure rip info is not passed.
- (config-router)#passive-interface f1/1
- (config-router)#network 203.0.113.0
- Add default route on R4 using 203.0.113.2
- (config)#ip route 0.0.0.0 0.0.0.0 203.0.113.2
- Distribute default route over rip
- (config)#route rip
- (config-router)#default-information originate
- So the first time I did it will out looking at the answer I put in “network 0.0.0.0” before the originate command. When I verified the routes on the other routers the 0.0.0.0 did not appear until I added “network 0.0.0.0”, but decided it was best to reset the entire RIP routing with a “no route rip” to clear everything out.